Finally installed the skid plates.  Post is here (You need to Login or Register to view media files and links)

pghportager wrote on Mar 22^nd, 2011 at 8:18pm:

Tried.  When someone finally answered all I could hear was snoring.  

Love the Legos tip, awesome!

Neat trick!!  I have a sudden urge to put a Lego Star Wars Darth Vader character in a pool of acetone and watch the horror!

(You need to Login or Register to view media files and links)


legos might work for ya, unless you really want to paint your boat


you can likely find a couple of dozen threads on royalex repair on cboats

Will do Mtn paddler.  So far, all I've done is work out two nice dents in the bow with a heat gun.  No problems there.  Just warmed them up slowly inside and out and pushed a little with a rounded dowel rod. 

One thing I've seen many conflicting opinions on in my research is the use of denatured alcohol vs. acetone for the skid plate installation.  The place i bought the kit from said to use acetone in the directions, other sites have said to use alcohol and never acetone as it can melt the vinyl.  Then additional research points me back to the use of acetone as it softens the vinyl to accept better adhesion with the resin.  I plan to use acetone - sparingly.

fyi - i bought the skid plate kit from Northwest Canoe - (You need to Login or Register to view media files and links)
Got the Tandem/Universal kit which comes with urethane resin instead of epoxy for royalex hulls.  Best price for a complete kit that I could find.

The skid plate kit should be here tomorrow, so it'll be a deep cleansing and installation of those this weekend.  Following weekend will be a repaint job.  As long as the weather cooperates anyways.  I'll post progress reports, maybe even pics if I remember to take them.

good luck

I'm in an identical situation, except it's an OLD Dagger Caper.  It has met lots of rocks.  Gouges, dings, cuts, scrapes.  I was going to fill, paint, and skid.  I've only got as far as putting it on sawhorses.  So, pghportager, please pass along anything you learn as you progress.  There's tons and tons of stuff on the internet on the topic; seems like anyone and everyone has his own opinions on what to use and how to proceed.  If I could find 3 sites that agree, based on experience and not theory, using different verbiage so it's obvious they're not just copying each other, then I would go with that as a good consensus.

Thanks Preacher.  I guess I'm just too cynical, assuming they'd tell me that anything other than Mad River-approved-royalex paint at $22/can would somehow melt the canoe and cause all sorts of environmental problems.

Now, I also have an issue with my Maytag washing machine - maybe you could call them as well? 

(You need to Login or Register to view media files and links)

I called the number and asked.  Got some great info.  Any Krylon will do.  A flat laquer is best according to the guy on the phone.  He didn't even try to sell me anything.  Actually mentioned they took the official Royalex paint off the shelves because it wasn't moving and spoiled in the can.

Amazing what can done with a telephone.  

I've seen the "Royalex Paint" advertised by the canoe manufacturers.  It runs north of $20 per 12 ounce can.  Seems pretty steep, but it supposedly works.  But if others have tried some of the Krylon or Rustoleum paints made for plastics, and it has worked, I'd like to hear it.  thanks.

I think you'd want to fill the deep gouges first.  Then paint.  Then skid plates.   :question

For paint I'd call Mad River.  Their website appears to be a decent place to start, some good info there.