QuietJourney Forums
Boundary Waters / Quetico Discussion Forums >> Fishing Tips for the BWCA and Quetico >> Depth finder power source
https://quietjourney.com/community/YABB.cgi?num=1377347241

Message started by mastertangler on Aug 24th, 2013 at 12:27pm

Title: Re: Depth finder power source
Post by solotripper on Jul 29th, 2014 at 8:57pm
MP,

I bought mine from Amazon. Panasonic must of bought the rights from Sanyo.

  (You need to Login or Register

I also bought this charger after doing some research.

  (You need to Login or Register

They are lower in volts, 1.2.
I don't have a meter, so no help there.

I'm a little confused/ignorant about the idea of having more batteries than optimum you don't get any better run time but will still have considerable power in them?

My manual says between 10-20 volts. I was thinking about the run times Quentin was getting from that 18 volt lithium Ryobi drill battery and thought if I ran 12 x 1.2= 14.4, it would put me in that "sweet spot" longer.

I hooked it up and ran the finder in "simulator" mode just to see if I had things hooked up right.

Maybe when I get the charger, I'll let it run until it quits just to see how many hours I get.

If I turn off depth alarm and hung transducer in a bucket of water that should give me some idea of run time or maybe not?

QuietJourney Forums » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.