QuietJourney Forums
Boundary Waters / Quetico Discussion Forums >> Strictly Gear - Gear specific reviews and ideas. >> Gear review NeverWet
https://quietjourney.com/community/YABB.cgi?num=1399934644

Message started by Magicpaddler on May 12th, 2014 at 10:44pm

Title: Re: Gear review NeverWet
Post by solotripper on Jun 2nd, 2014 at 9:44pm

Ranger wrote on May 13th, 2014 at 12:31am:
Looking forward to trying this. I used my long double blade with the canoe (solo) a few weeks ago. Works great, but I always end up soaked.


You do have drip rings on double shaft?
Also how long is your double paddle?
I can't remember your canoe Ranger, but on-line research told me that for a tandem width canoe, you need a paddle at least 9 ft long.

  (You need to Login or Register

I'm 5' 9", so a 9ft paddle is just a little longer than they recommend,

The added length is needed because a tandem canoe or even a big solo is much wider than a kayak.

Shorter paddle might seem the answer, but with the higher gunnels in a canoe, a paddle that's to short forces you to "windmill" paddle, which puts the shaft/blade more vertical which in turn puts more water in your boat, drip rings or not.

You want what they call a "touring" stroke, with the paddle being almost horizontal compared to the "windmill" stroke.

The experts call it high angle or low angle paddling.

  (You need to Login or Register

I paddled almost exclusively with the double in tough head-on winds and got very little water in boat considering how hard I was paddling.





QuietJourney Forums » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.