May 26th, 2026 at 9:26am (UTC)

(Moderators: db, paddlemaker)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Reply Reply Add Poll Add Poll Send Topic Send Topic Print Print
10 Replaceable skid plates (Read 7171 times)
Magicpaddler
Inukshuk
Offline



Posts: 1321
Location: Chicago Burbs
Joined: Jan 7th, 2004
Replaceable skid plates
Oct 30th, 2011 at 4:02pm
Quote Quote Print Post Print Post  

If you ever had a new or really nice canoe you hate to get the first scratches in it.  The most ware will come on the keel line near the bow or stern.  Just a little protection is these areas would make your canoe stay closer to unscratched. 
I had picked up a partial role of what looks like 4 inch wide black electrical tape in the dumpster at a construction site. I cut a piece in a elongated rain drop shape and put it on my canoe before last year’s Q trips.  At the end of the trip both the bow and stern skid plates had some holes in the tape but the area under them was in good shape.  I removed the old ones and put new ones on to continue the protection for another year.  Any one else try any thing like this. 
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
db
Web-lackey
Inukshuk
Voyageur
Offline



Posts: 5460
Location: Just off the beaten path.
Joined: Sep 14th, 2002
Re: Replaceable skid plates
Reply #1 - Oct 31st, 2011 at 6:05am
Quote Quote Print Post Print Post  
I like that shape a lot, not the folds/creases though.

I've tried gaffers tape, strapping tape and bicycle inner tubes once each. The rocks shredded them or the water rendered them ineffective. I forget which was which but none made it a whole trip. I could tell when they failed just by listening.

Old road bike tires (kevlar belted) work well for me. The really expensive kind that come in (new) a box. Just ask a bike shop to set a few old used ones aside for you. Ideally, w/ some rubber left but no tread. Cut off the beads and use contact cement to apply.  They stretch and conform very nicely.

I don't use them because I may hit a rock by accident. I use them because I get out a lot and they are grippy. I can usually find a spot where I can lift and set the bow and stern on rock so the canoe is free to move with the waves w/o damaging the canoe. I love 'em and they last for years. Wouldn't want them on in rapids though as they are grippy.

(You need to Login or Register to view media files and links)

That canoe is ~25 years old and I've been using contact cement for over 20. I did noticed a slight yellowing last time I replaced my tires. YMMV
  
Back to top
WWW WWW  
IP Logged
 
solotripper
Inukshuk
Offline



Posts: 8105
Location: clarkston MI
Joined: Mar 14th, 2005
Re: Replaceable skid plates
Reply #2 - Oct 31st, 2011 at 3:04pm
Quote Quote Print Post Print Post  
Quote:
Old road bike tires (kevlar belted) work well for me.


What a clever idea!
I like that out of the box approach to doing things yourself  Cool
That called for a thumbs-up, but a cool smile will have to do.
  
Back to top
 
IP Logged
 
Preacher
Contributer
Subscriber
Offline



Posts: 1327
Location: COTU
Joined: Apr 10th, 2010
Re: Replaceable skid plates
Reply #3 - Oct 31st, 2011 at 3:54pm
Quote Quote Print Post Print Post  
I don't worry about scratches that don't go through to fabric.  To me they're just part of using the canoe.  I've been in too many situations where not scratching the canoe puts me at more risk or is just a huge hassle than it's worth.

Why the aversion to felt plates?  The bike tires is a neat idea with purpose.  I've heard of some folks laying a strip of CF tape along the keel.
  
Back to top
 
IP Logged
 
Solus
Inukshuk
Offline



Posts: 967
Location: Northern Minnesota
Joined: Oct 6th, 2006
Re: Replaceable skid plates
Reply #4 - Oct 31st, 2011 at 9:13pm
Quote Quote Print Post Print Post  
I'm a fan of simply adding a strip or two  (occasionally three) of fiberglass cloth and resin when the stems of the boat get abraded. When the resin sets I sand so it conforms to the original shape. Easy to do and doesn't create drag or change the dynamic of the boat or the appearance for that matter.
  
Back to top
 
IP Logged
 
Joe_Schmeaux
Inukshuk
Offline



Posts: 395
Location: Alberta
Joined: Mar 23rd, 2010
Re: Replaceable skid plates
Reply #5 - Nov 1st, 2011 at 3:44am
Quote Quote Print Post Print Post  
Solus wrote on Oct 31st, 2011 at 9:13pm:
I'm a fan of simply adding a strip or two  (occasionally three) of fiberglass cloth and resin when the stems of the boat get abraded. When the resin sets I sand so it conforms to the original shape. Easy to do and doesn't create drag or change the dynamic of the boat or the appearance for that matter.

Me too!

But that's only because our boats look so cool and have such great dynamics to start with Grin
  
Back to top
 
IP Logged
 
Mad_Mat
Inukshuk
Offline



Posts: 1549
Joined: Apr 21st, 2003
Re: Replaceable skid plates
Reply #6 - Nov 1st, 2011 at 12:09pm
Quote Quote Print Post Print Post  
adding felt skid plates and resin adds a "fair" amount of weight to a boat - especially if you have an ultralight hull.

I'd rather be more careful vs adding "bang plates" to my boats - repair only when/if needed.

"Trimbrite" - I  added a strip to the bow and stern on mu UL boats - something of a compromise between nothing and full blown skid plates - not as cheap as that black tape from the dumpster though.  and bike tires make it rain!
  
Back to top
 
IP Logged
 
Preacher
Contributer
Subscriber
Offline



Posts: 1327
Location: COTU
Joined: Apr 10th, 2010
Re: Replaceable skid plates
Reply #7 - Nov 1st, 2011 at 2:17pm
Quote Quote Print Post Print Post  
Trimbrite is neat.  Mildly amused at the carbon fibre style.  Get the look of carbon fibre without the cost or benefits!  heehee.  I never thought carbon fibre actually looked good, that the weight & performance were the big wins.  Rice up your canoe!   Cheesy

Can totally appreciate the performance concerns for those who geek out on that action.
  
Back to top
 
IP Logged
 
db
Web-lackey
Inukshuk
Voyageur
Offline



Posts: 5460
Location: Just off the beaten path.
Joined: Sep 14th, 2002
Re: Replaceable skid plates
Reply #8 - Nov 1st, 2011 at 5:22pm
Quote Quote Print Post Print Post  
Mad_Mat wrote on Nov 1st, 2011 at 12:09pm:
and bike tires make it rain!

Grin I like rainy days! Everything looks so juicy.... Only time I don't is when it's time to pack up the tent. That's not as much fun in the rain.
  
Back to top
WWW WWW  
IP Logged
 
Magicpaddler
Inukshuk
Offline



Posts: 1321
Location: Chicago Burbs
Joined: Jan 7th, 2004
Re: Replaceable skid plates
Reply #9 - Nov 10th, 2011 at 11:25pm
Quote Quote Print Post Print Post  
What gave me the idea was db’s tires but I did not have any tires that would work on hand. The first set of tape skid plates went on better with almost none of the wrinkles.  I don’t know what I did this time that made it wrinkle. This one may be further up the end of the canoe.  I have enough to make several more sets so I am set until the canoe gets enough scratches that I am not so paranoid. 
LOL Tires make it rain.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Reply Reply Add Poll Add Poll Send Topic Send Topic Print Print
‹ Previous Topic | Next Topic ›

 
  « The Put-In ‹ Board  ^Top   

QuietJourney Forums » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge