10 Oil Canning Kevlar (Read 1451 times)
Kawishiway
Inukshuk
Offline



Posts: 544
Location: Dakota
Joined: Nov 1st, 2003
Oil Canning Kevlar
Sep 9th, 2023 at 10:15pm
Quote Quote Print Post Print Post  
Anyone ever fix an oil canning Kevlar canoe and did you have much success? I’m currently waiting for the glass to set on a five foot foot section of an old Souris 17 I oil canned with too much pressure from the straps bringing it home. It bounced back ok but large cracks that need filling and renewed integrity.

Under repair now. First layup on exterior drying. May add glass on interior.  It’s not the old girl’s first patch.  Any input appreciated.

K
« Last Edit: Sep 24th, 2023 at 12:26am by Kawishiway »  
Back to top
 
IP Logged
 
Jimbo
Voyageur
Inukshuk
Offline



Posts: 4559
Location: Florida
Joined: Oct 6th, 2002
Re: Oil Canning Kevelar
Reply #1 - Sep 10th, 2023 at 3:01pm
Quote Quote Print Post Print Post  
K,

Was able to fix my SR17 by glassing just one side (@ 2'x2' patch).  Had planned to do BOTH sides - and may eventually do so - but doing just the one side seems to be holding up just fine now, 3+ years later.

A towboat service guy got a little careless when unloading my canoe at the LLC drop-off.  My son & his buddy heard the crack but didn't see the damage.  The oilcanning became noticeable about a half-hour later.  Half a roll of duct tape & keeping weight on the weak area allowed them to paddle an additional 8 days.

Good luck!

Jimbo  Cool
  
Back to top
IP Logged
 
Jimbo
Voyageur
Inukshuk
Offline



Posts: 4559
Location: Florida
Joined: Oct 6th, 2002
Re: Oil Canning Kevelar
Reply #2 - Sep 10th, 2023 at 7:42pm
Quote Quote Print Post Print Post  
PS.

It was the "outside" of the hull that we patched, smoothed & sanded. Maybe this winter I'll get around to doing the inside but it's holding up just fine, as is.

Jimbo  Cool
  
Back to top
IP Logged
 
Kawishiway
Inukshuk
Offline



Posts: 544
Location: Dakota
Joined: Nov 1st, 2003
Re: Oil Canning Kevlar
Reply #3 - Sep 11th, 2023 at 2:13am
Quote Quote Print Post Print Post  
Thanks Jimbo!

I had two cracks totally just under 5 feet. I used two over sized strips totaling 60” x 4” just on the outside for now. I’m considering adding another two pieces totaling 62” x 6”. I’m curious why you used 2’ x 2’. Was the damaged area that large or was there overall structural integrity reasoning behind your repair?  I too want to insure she floats and withstands my ability to learn something new the hard way.

Thanks in advance and good too hear from you!

K
« Last Edit: Sep 24th, 2023 at 12:27am by Kawishiway »  
Back to top
 
IP Logged
 
Jimbo
Voyageur
Inukshuk
Offline



Posts: 4559
Location: Florida
Joined: Oct 6th, 2002
Re: Oil Canning Kevelar
Reply #4 - Sep 11th, 2023 at 5:48am
Quote Quote Print Post Print Post  
Well, I haven't looked at it in a while and, right now, I'm separated from it by the Atlantic Ocean. If memory serves correctly, the crack or cracks were not very long, ran more vertical than lengthwise, & were confined between a couple of the "ribs" of the vessel.  The guy dropped my boat on solid rock but, apparently, not flat rock.  The impact was fairly localized. 2 feet by 2 feet was enough to affix the patch solidly across a couple supportive ribs (where the hull was a bit thicker) & get the job done.

I'll take a closer look when I get back home to verify.  Sounds like your damage may have been more substantial than mine, though. Could be that both an inside & outside application are warranted.

Later,

Jimbo  Cool
  
Back to top
IP Logged
 
Kawishiway
Inukshuk
Offline



Posts: 544
Location: Dakota
Joined: Nov 1st, 2003
Re: Oil Canning Kevlar
Reply #5 - Sep 11th, 2023 at 10:23am
Quote Quote Print Post Print Post  
Understanding your damage was more vertical answered my questions. My damage is horizontal.

I will be adding an additional layup on the exterior, slightly wider and longer and one layup on the inside. Maybe overkill, but again I’ve learned the hard way so many times that I’m happier knowing I’ve done my best up front. It’s also therapeutic.

We’re good here.  I’m confident this will work out as well as the repair I made a few years back that looked like a 2x4 end was dropped from 100 feet punching a horizontal and vertical rip in the bottom. Ouch! 

And yes, Duct Tape IS Mandatory equipment.

Charlie ain’t pretty, but she floats.

Thanks!

Safe travels!
« Last Edit: Sep 24th, 2023 at 12:27am by Kawishiway »  
Back to top
 
IP Logged
 
db
Web-lackey
Inukshuk
Voyageur
Offline



Posts: 5433
Location: Just off the beaten path.
Joined: Sep 14th, 2002
Re: Oil Canning Kevelar
Reply #6 - Sep 13th, 2023 at 8:59pm
Quote Quote Print Post Print Post  
Got a picture?
  
Back to top
IP Logged
 
Kawishiway
Inukshuk
Offline



Posts: 544
Location: Dakota
Joined: Nov 1st, 2003
Re: Oil Canning Kevlar
Reply #7 - Sep 22nd, 2023 at 1:56pm
Quote Quote Print Post Print Post  
Here you go.  Not a great pic for clarity from what I see on my end. I'm sure it's me - not clear on what I am doing.
« Last Edit: Sep 24th, 2023 at 12:28am by Kawishiway »  
Back to top
 
IP Logged
 
solotripper
Inukshuk
Online



Posts: 8010
Location: clarkston MI
Joined: Mar 14th, 2005
Re: Oil Canning Kevelar
Reply #8 - Sep 22nd, 2023 at 4:14pm
Quote Quote Print Post Print Post  
   This might give you some good info/tips.

    (You need to Login or Register to view media files and links)

   While your doing those patches maybe refinish the whole outside?

  (You need to Login or Register to view media files and links)

  Maybe just re-varnish it?

    (You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Kawishiway
Inukshuk
Offline



Posts: 544
Location: Dakota
Joined: Nov 1st, 2003
Re: Oil Canning Kevlar
Reply #9 - Sep 23rd, 2023 at 1:35am
Quote Quote Print Post Print Post  
ST,

I agree. I realize I wasn’t able to share a sizable picture and I’m sure it’s my lack of knowing the ropes around the QJ these days.

With a better picture it would show the 5 foot patch and crack below. The Pat h needs feathering and I am going to apply an additional patch over it as well as in the interior. After that I will eventually refinish the entire boat as I did from the former damage.

Charlie winters under a tarp in the backyard that on occasion exposes the hull and with an excess of walnut trees and squirrels in my backyard gets a weathered look along with the fact I bought it well used. The last time I refinished her she sparkled.

If and when I figure out how to post better pictures and when Charlie is back in her best character I will again post a picture. It may be late next spring before then so.. something to look forward to over the winter months? I’m  awfully busy with work this time of year so it is what it is. “Winter is coming “. 😏

Thanks for the links my friend! I’ll give them a look see.

The best lesson here is.. that Kevlar repairs are not that difficult and usually doable.

K
« Last Edit: Sep 24th, 2023 at 12:28am by Kawishiway »  
Back to top
 
IP Logged
 

 
  « The Put-In ‹ Board  ^Top