QuietJourney Forums - Depth finder power source

Guest Message

Hi there Guest,

It looks like you are enjoying reading our forum, so why don't you register an account with us to stop seeing this message and benefit from many more features. Registration is easy and will only take you a few minutes.

If you already have an account with us, then click here to log in.

Thank you,

db

(Moderators: The_Beaver, fishinbuddy, Kingfisher, db)

‹ Previous Topic | Next Topic ›

Pages: 1 ... 13 14 [15]

Add Poll

Send Topic

Depth finder power source (Read 68711 times)

HighnDry Inukshuk Offline Posts: 1056 Location: Minneapolis Joined: Apr 29^th, 2013	Re: Depth finder power source Reply #140 - Jul 31^st, 2018 at 3:33pm	Quote Print Post
	I'm taking my SR Q17 this weekend and the in-hull option might work. I've always had better luck re: functionality with having the transducer actually in the water. My solo Northwinds has factory guide skid plates as well as the foam core which makes it hard to locate a flat spot on the boat's inner hull to place the skimmer transducer. I like the rail site's option. I'll have to look at that as well. Still pondering options......


	Skype/VoIP IP Logged

Old Salt Inukshuk Offline Posts: 4871 Location: Crossville, TN Joined: Jun 17^th, 2004	Re: Depth finder power source Reply #141 - Jul 31^st, 2018 at 4:06pm	Quote Print Post
	You should have no issues with the SRQ 17. I used silicone caulk to mount transducer under bow seat. Works great.


	IP Logged

arnesr Inukshuk Offline Posts: 199 Location: Hortonville WI Joined: Mar 19^th, 2004	Re: Depth finder power source Reply #142 - Jul 31^st, 2018 at 8:17pm	Quote Print Post
	I have a SR 18.5 and I am able to shoot thru the hull without issue. What I do is, I have a piece of closed cell packing foam about 4" x 5" x 1" that I traced the transducer outline on. Then I cut a hole slightly smaller than the outline so I can push my transducer into it and it is firmly held in place and upright. I then silicone the foam in place and it allows me to easily remove or install the transducer with just a splash of water to maintain the signal. I have found the silicone sticks better to the canoe than the foam, so I drilled holes in each corner of the foam and injected silicone to make a soft rivet to hold it in place. The silicone does come off the canoe with a gentle scrape from a plastic putty knife, leaving no marks.


	IP Logged

db Web-lackey Inukshuk Voyageur Offline Posts: 5460 Location: Just off the beaten path. Joined: Sep 14^th, 2002	Re: Depth finder power source Reply #143 - Aug 1^st, 2018 at 5:57am	Quote Print Post
	HighnDry wrote on Jul 31^st, 2018 at 3:33pm: I've always had better luck re: functionality with having the transducer actually in the water. My solo Northwinds has factory guide skid plates as well as the foam core which makes it hard to locate a flat spot on the boat's inner hull to place the skimmer transducer. All the noise the cord alone made as I paddled drove me nuts. Attached was my solution then. The ducer is in the bag of water at the edge of the foam core. There are better solutions but hey man, it worked. I'm offering it as an easy way for you to test placement ideas and maybe help you find what might work best for you.


	WWW IP Logged

Wally13 Inukshuk Offline Posts: 331 Location: Bettendorf, IA Joined: Jan 1^st, 2008	Re: Depth finder power source Reply #144 - Aug 2^nd, 2018 at 3:26am	Quote Print Post
	DB, What kind of canoe do you have? I have a Bell Magic solo and the "shoot thru the hull" method using a foam cutout in my bow works like a charm. However, I have tried to make the "shoot thru the hull" method on my Wenonah MN II tandem work and I cannot get it to shoot without all kinds of interference. I have placed the transducer puck all over the floor in the bow to no avail. I know there are foam ribs across several areas in my skin coat Kevlar and I was sure to stay away from shooting thru foam core. From your pic ...it looks like you have a Wenonah canoe ... and it is working for you ? I am not sure if a MINNESOTA II has some construction material that may be blocking the sonar waves emitted from my Lowrance X-4 depth finder. Anyone know about the construction material of a 1992 MN II Kevlar skin coat ? I thought a 1996 Bell Magic would have similar construction material as a Wenonah MN II.


	IP Logged

db Web-lackey Inukshuk Voyageur Offline Posts: 5460 Location: Just off the beaten path. Joined: Sep 14^th, 2002	Re: Depth finder power source Reply #145 - Aug 2^nd, 2018 at 6:20am	Quote Print Post
	The shot was in KF's Wenonah Prism. What flavor exactly I don't know but I believe it had a foam core.


	WWW IP Logged

Magicpaddler Inukshuk Offline Posts: 1321 Location: Chicago Burbs Joined: Jan 7^th, 2004	Re: Depth finder power source Reply #146 - Aug 2^nd, 2018 at 11:14am	Quote Print Post
	H&D Walley13 It is true that a transducer does not shoot through foam care well at all but you can go around it. NorthStar Bell canoes have a cut off diamond shaped foam core in the floor of the canoe. I have a NorthStar Polaris Bell Magic with the same floor as the Northwind your Bell Magic and I mount the transducer behind the back seat just off of the foam core. Works well. I use plumbers putty and it takes me about 10 minutes to switch it from one canoe to another. It sticks well enough that it has never fallen off in many trips to Canada and back but it is easy to remove to put in another canoe. MP


	IP Logged

Wally13 Inukshuk Offline Posts: 331 Location: Bettendorf, IA Joined: Jan 1^st, 2008	Re: Depth finder power source Reply #147 - Aug 3^rd, 2018 at 3:12am	Quote Print Post
	MP, I checked the location of the foam transducer pad in my Bell Magic and I have it placed almost to the end of my bow. It is outside of the diamond shaped foam core that you said is in a Bell Magic. Now I get why my shoot thru the hull set up works in my Bell. I peeked into the inside of my Wenonah MN II and it looks as though Wenonah does not use a diamond shaped foam core layout like Bell does. The foam core in the MN II covers a real big area of the bottom of the canoe. There appears to be a very small area that is free of the foam core that is in front end of the bow just behind the skid plate I installed. I will give that location a try to install my foam pad for the transducer.


	IP Logged

HighnDry Inukshuk Offline Posts: 1056 Location: Minneapolis Joined: Apr 29^th, 2013	Re: Depth finder power source Reply #148 - Sep 26^th, 2018 at 3:00pm	Quote Print Post
	All good ideas. I have to figure out how to navigate the factory skid plate and the foam core construction.


	Skype/VoIP IP Logged

Magicpaddler Inukshuk Offline Posts: 1321 Location: Chicago Burbs Joined: Jan 7^th, 2004	Re: Depth finder power source Reply #149 - Sep 26^th, 2018 at 3:42pm	Quote Print Post
	HighnDry wrote on Sep 26^th, 2018 at 3:00pm: All good ideas. I have to figure out how to navigate the factory skid plate and the foam core construction. Be more concerned with the foam core then the skid plate. Depending on skid plate material and application many times it will have little effect on performance. Probably changes cone shape more than anything.


	IP Logged

Pages: 1 ... 13 14 [15]

Add Poll

Send Topic

‹ Previous Topic | Next Topic ›